Circular economy in the 3D printing construction industry: a design, durability, materials, and processes solution to achieve decent, affordable, and sustainable housing in Nuevo León and Mexico
Abstract
This review of 3D-printing of cementitious materials (3DPCM) evaluates its suitability to build Decent, Affordable and Sustainable Housing (DASH) in Mexico, considering mechanical requirements, durability, and sustainability. The climate and economic crises are current challenges for a Circular Construction Industry, but the 3DPCM reduces CO2 emissions, materials and waste, labor, times and costs by up to 88%, 50%, 70% and 90%, respectively, achieving the strength and durability of conventional construction. Likewise, there are 3DPCM companies in developed countries, but importing this technology to developing countries is not affordable, therefore, research into 3DPCM technologies is ongoing in Nuevo León, Mexico, allowing the construction of DASH for $1,700-$4,500/m2.
Downloads
References
Abdalla, H., Fattah, K.P., Abdallah, M., Tamimi, A.K. (2021), Environmental Footprint and Economics of a Full-Scale 3D-Printed House. Sustainability. 13:11978. https://doi.org/10.3390/su132111978. DOI: https://doi.org/10.3390/su132111978
Adesina, A. (2020), Recent advances in the concrete industry to reduce its carbon dioxide emissions. Env. Challen. 1:100004. https://doi.org/10.1016/j.envc.2020.100004 DOI: https://doi.org/10.1016/j.envc.2020.100004
Adesina, A. (2021), Circular Economy in the Concrete Industry. Build. Eng. 43:103233. https://doi.org/10.1016/j.jobe.2021.103233 DOI: https://doi.org/10.1007/978-981-15-7525-9_64-1
Ahmed, G.H. (2023) A review of “3D concrete printing”: Materials and process characterization, economic considerations and environmental sustainability. J. Build. Eng. 66:105863. https://doi.org/10.1016/j.jobe.2023.105863 DOI: https://doi.org/10.1016/j.jobe.2023.105863
Alkhalidi. A, Hatuqay, D. (2020), Energy efficient 3D printed buildings: Material and techniques selection worldwide study. J. Build. Eng. 30:101286. https://doi.org/10.1016/j.jobe.2020.101286 DOI: https://doi.org/10.1016/j.jobe.2020.101286
ArchDaily (2015), Tatiana Bilbao’s $8,000 House Could Solve Mexico’s Social Housing Shortage. Accesado el 28 de septiembre de 2023 en: https://www.archdaily.com/775233/tatiana-bilbaos-8000-house-could-solve-mexicos-social-housing-shortage
ArchDaily (2018), Dubai planifica imprimir en 3D el 25% de sus nuevos edificios en 2025. Accesado el 30 de septiembre de 2023 en: https://www.archdaily.mx/mx/901205/dubai-planifica-imprimir-en-3d-el-25-percent-de-sus-nuevos-edificios-en-2025
ArchDaily (2021a), El futuro es ahora: Casas impresas en 3D comienzan a ser habitadas en los Países Bajos. Accesado el 30 de septiembre de 2023 en: https://www.archdaily.mx/mx/961093/el-futuro-es-ahora-casas-impresas-en-3d-comienzan-a-ser-habitadas-en-los-paises-bajos#:~:text=los%20Pa%C3%ADses%20Bajos-,El%20futuro%20es%20ahora%3A%20Casas%20impresas%20en%203D%20comienzan%20a,habitadas%20en%20los%20Pa%C3%ADses%20Bajos&text=Si%20hace%20algunos%20a%C3%B1os%20la,que%20ha%20llegado%20para%20quedarse.
ArchDaily (2021b), La estética de la automatización: análisis de una vivienda asequible impresa en 3D. Accesado el 30 de septiembre de 2023 en: https://www.archdaily.mx/mx/964468/la-estetica-de-la-automatizacion-analisis-de-una-vivienda-asequible-impresa-en-3d
Arunothayan, R., Nematollahi, B., Bong, S.H., Ranade, R., Sanjayan, J. (2020), Hardened Properties of 3D Printable Ultra-High Performance Fiber-Reinforced Concrete for Digital Construction Applications. Rheol. Proc. Constr. Mater. 23: 355–362). https://doi.org/10.1007/978-3-030-22566-7_41 DOI: https://doi.org/10.1007/978-3-030-22566-7_41
Baskar, S., Sharma, R., Chinnappan, A., Sehrawat, R. (2021), “Handbook of Solid Waste Management”, Singapore, Springer. https://doi.org/10.1007/978-981-15-7525-9_64-1 DOI: https://doi.org/10.1007/978-981-16-4230-2
Baz, B., Aouad, G., Leblond, P., Al-Mansouri, O., D’hondt, M., Remond, S. (2020). Mechanical assessment of concrete – Steel bonding in 3D printed elements. Constr. Build. Mater. 256:119457. https://doi.org/10.1016/j.conbuildmat.2020.119457 DOI: https://doi.org/10.1016/j.conbuildmat.2020.119457
Be more 3D (2024), Por fin construcción y sencillez unidas. Accesado el 11 de abril de 2024 en: https://bemore3d.com/
Buswell, R.A., Soar, R.C, Gibb, A.G.F., Thorpe A. (2007), Freeform Construction: Mega-scale Rapid Manufacturing for construction. Automation in Construction, Volume 16, Issue 2, Pages 224-231. https://doi.org/10.1016/j.autcon.2006.05.002. DOI: https://doi.org/10.1016/j.autcon.2006.05.002
CEMEX (2022), CEMEX es la primera compañía que introduce impresión 3D con concreto en México. Accesado el 1 de septiembre de 2023 en: https://www.cemexmexico.com/-/cemex-es-primera-compa%C3%B1%C3%ADa-que-introduce-impresi%C3%B3n-3d-con-concreto-en-m%C3%A9xico#:~:text=CEMEX%20es%20Primera%20Compa%C3%B1%C3%ADa%20que%20Introduce%20Impresi%C3%B3n%203D%20con%20Concreto%20en%20M%C3%A9xico,-Monterrey%2C%20M%C3%A9xico%2004&text=CEMEX%2C%20S.A.B.%20de%20C.V.%20(%E2%80%9C,y%20de%20grado%20de%20construcci%C3%B3n.
CentroUrbano (2023), Nuevo León presenta su Programa Especial de Vivienda 2022-2027. Accesado el 29 de septiembre de 2023 en: https://centrourbano.com/vivienda/nuevo-leon-programa-vivienda/
Cicione, A., Kruger, J., Richard, Walls, S., Van Zijl, G. (2021), An experimental study of the behavior of 3D printed concrete at elevated temperatures. Fire Safety J. 120:103075. https://doi.org/10.1016/j.firesaf.2020.103075. DOI: https://doi.org/10.1016/j.firesaf.2020.103075
CMIC-CEICO (2023), Principales variaciones en el precio de los insumos y su impacto en las obras. Accesado el 17 de abril de 2024 en: https://www.cmic.org.mx/comisiones/Tematicas/costosyp/Informes_IPP/2023/CEICO_Informe_Octubre_2023.pdf
Colorado, H. A., Velásquez, E. I. G. Monteiro, S. N. (2020), Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives. J. Mater. Res. Tech. 9(4):8221-8234. https://doi.org/10.1016/j.jmrt.2020.04.062 DOI: https://doi.org/10.1016/j.jmrt.2020.04.062
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V.N., Habert, G., Agusti-Juan, I. (2018), Vision of 3D printing with concrete—Technical, economic and environmental potentials. Cem. Concr. Res. 112:25–36. https://doi.org/10.1016/j.cemconres.2018.06.001 DOI: https://doi.org/10.1016/j.cemconres.2018.06.001
De Souza, E.A., Borges, P.H., Stengel, T., Nematollahi, B., Bos, F.P. (2024), 3D printed sustainable low-cost materials for construction of affordable social housing in Brazil: Potential, challenges, and research needs. J. Build. Eng. 87:108985. https://doi.org/10.1016/j.jobe.2024.108985 DOI: https://doi.org/10.1016/j.jobe.2024.108985
Díaz-Aguilera, J.H. (2024), “Estudio del diseño eficiente, optimización, durabilidad y sostenibilidad de una pasta de cemento activado alcalinamente con base en metacaolín y piedra caliza”, Tesis de doctorado, Universidad Autónoma de Nuevo León.
Ding, T., Xiao, J., Zou, S., Zhou, X (2020), Anisotropic behavior in bending of 3D printed concrete reinforced with fibers. Compos. Struct., 254:112808. https://doi.org/10.1016/j.compstruct.2020.112808 DOI: https://doi.org/10.1016/j.compstruct.2020.112808
El Economista. (2022a). Hay que hacer algo rápido: Gene Towle sobre la falta de oferta de vivienda social. Accesado el 29 de agosto de 2023 en: https://www.eleconomista.com.mx/econohabitat/Hay-que-hacer-algo-rapido-Gene-Towle-sobre-la-falta-de-oferta-de-vivienda-social-20220325-0091.html
El Economista (2022b), Canadevi advierte rezago del 30% en colocación de vivienda en Nuevo León. Accesado el 25 de septiembre de 2023 en: https://www.eleconomista.com.mx/estados/Canadevi-advierte-rezago-del-30-en-colocacion-de-vivienda-en-Nuevo-Leon-20220921-0129.html
El Economista (2023), Nuevo León se presentará un programa para complementar créditos por déficit de 16,000 viviendas. Accesado el 25 de septiembre de 2023 en: https://www.eleconomista.com.mx/estados/Nuevo-Leon-se-presentara-un-programa-para-complementar-creditos-por-deficit-de-16000-viviendas-20230423-0008.html
El Inaty, F., Baz, B.A., Aouad, G. (2022). Long-term durability assessment of 3D printed concrete. J. Adhesion Sci. Technol. 37:1-16. https://doi.org/10.1080/01694243.2022.2102717 DOI: https://doi.org/10.1080/01694243.2022.2102717
EnteUrbano (2020), ¿Cuánto cuesta una casa impresa en 3D?. Accesado el 17 de abril de 2024 en: https://enteurbano.com/cuanto-cuesta-una-casa-impresa-en-3d/#google_vignette
Forbes México (2018), 100 casas serán construidas con impresoras 3D en El Salvador. Accesado el 17 de abril de 2024 en: https://www.forbes.com.mx/casas-seran-construidas-con-impresoras-3d-en-el-salvador/
Copyright (c) 2024 Mendoza-Rangel, J. M., Zapata-Padilla, J. R., Anguiano-Pérez, F. D., Velásquez-Hernández, M. I., Mares-Chávez, S., Espino-Robles, E. E., Alvarado-López, J. I., López-Serna, M.A., Mendoza-Jiménez, J. A., Díaz-Aguilera, J. H. (2024)
This work is licensed under a Creative Commons Attribution 4.0 International License.
_______________________________
License in effect from September 2020
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
.png)
