Rehabilitación de la estructura de un antiguo hotel para su utilización como banco
Abstract
RESUMEN
En el presente trabajo se muestra el proyecto mediante el cual se adecuó la estructura del edificio de un hotel de 100 años de antigüedad para su utilización como institución bancaria.
La estructura resistente del antiguo edificio estaba materializada por muros de mamposterÃa con algunas columnas metálicas en su interior, los entrepisos y techos son de perfiles metálicos con bovedillas de mamposterÃa cerámica. Se debÃan mantener las fachadas y los entrepisos y techos originales. Por otra parte, habÃa que demoler gran parte de los muros interiores portantes.
Ante esta situación se tuvo que:
- Reforzar los muros de mamposterÃa que no se demolÃan;
- Diseñar la estructura de reemplazo de los muros a demoler;
- Y diseñar nuevas estructuras para garantizar la estabilidad del nuevo edificio terminado y durante su construcción, de acuerdo a las normativas actuales.
Palabras clave: Rehabilitación; modelo; diafragma rÃgido; estabilidad espacial.
ABSTRACT
A project of rehabilitation of a 100 years old building is presented. The structure of the old building consisted of masonry walls with some metal columns inside them, the slabs and ceilings have metal girders with small arches made of ceramic bricks. The original facades, slabs and ceilings were to be kept. On the other hand, to adapt the building to de new destination, most of the load-bearing walls were to be removed.
Before these requirements the following was decided:
- To make stronger the non removed masonry walls.
- To design a replacement structure for the removed walls.
- To design new structures that guarantee the stability of the new building during and after construction, in accordance to standards.
Key words: Rehabilitation; model; rigid diaphragm; spatial stability.
Downloads
References
Payer A., De Nápoli V., Hünicken D., Gattavara H. (2010), Rehabilitación de la estructura de un antiguo hotel para su utilización como banco, 21° Jornadas Argentinas de IngenierÃa Estructural, Buenos Aires, Argentina.
Reglamento CIRSOC 101 (1982), Cargas y Sobrecargas Gravitatorias para el Cálculo de Estructuras de Edificios, Instituto Nacional de TecnologÃa Industrial, Julio 1982.
Reglamento CIRSOC 201 (1984), Proyecto, Cálculo y Ejecución de Estructuras de Hormigón Armado y Pretensado, Instituto Nacional de TecnologÃa Industrial, Edición Julio 1982, Actualización 1984.
Reglamento CIRSOC 301 (1982) Proyecto, Cálculo y Ejecución de Estructuras de Acero para Edificios, Instituto Nacional de TecnologÃa Industrial, Julio 1982.
Reglamento INPRES-CIRSOC 103 (1991), Normas Argentinas Para Construcciones Sismorresistentes, Instituto Nacional de Prevención SÃsmica, Agosto 1991.
_______________________________
License in effect from September 2020
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.