Evaluation of pathological manifestations in buildings in terms of geographical orientation
Abstract
In order to evaluate the incidence of pathological manifestations on the facades of buildings, correlated with the geographical location, 52 buildings for residential and commercial use were analyzed in this study; these were distributed in different parts of the city of Curitiba, Brazil. It was observed that all the buildings evaluated had some type of pathological manifestation, and 25 of these were present on the facades of the buildings. It was found that the pathological manifestations on the facades show up in different amounts and locations, having identified a relation with the variation of temperature and the direction of the wind in terms of geographical orientation.
Keywords: durability; facade; geographical location; pathological manifestation.
Downloads
References
Abreu, D. W. M., Lins, A. M. T., Silva, M. S., Farias, M. B. S. (2013), “Patologias no revestimento de fachadas dos edifícios históricos da cidade de Campina Grande”, In: 5º. EnPAC, Campina Grande (PB).
American Society for Testing and Materials. ASTM – E 632-81. “Standard recommended practice for developing short-term accelerated test for prediction of the service life of building components and materials”, Philadelphia, 1996.
Antunes, G. R. (2010), “Estudo de manifestações patológicas de fachadas em Brasíla – Sistematização da incidência de casos”, Dissertação de mestrado. UNB.
Barros, M. M. S. B.; Sabbatini, F. H. (2001), “Produção de revestimentos cerâmicos para paredes de vedação em alvenaria: Diretrizes básicas”, (São Paulo, Brasil: EPUSP).
Galletto, A., Andrello, J. M. (2013), “Patologia em fachadas com revestimentos cerâmicos”, In: CINPAR – IX Congresso internacional sobre patología y recuperación de estruturas, João Pessoa (Brasil).
Japiassú, J., Carasek, H., Cascudo, O., Velosa, A. L. (2014), “Caracterização da interface azulejo/argamassa de fachadas históricas”, Revista ALCONPAT, V. 4, No. 1, pp. 55-76.
Lembo, F. (2011), “Pathologies of industrialized building made by bearing precast concrete panels. The case study of intervention with the same building system at Chiaromonte, Francavilla in Sinni and Lagonegro”, In: XII DBMC – International Conference on durability of Building Materials and Components, Porto (Portugal).
Melo, C. M., Carasek, H. (2014), “Relationship between the deterioration of multi story building facades and driving rain”, Revista de la Construcción, V. 13, No. 1, pp. 64-73.
Resende, M. M.; Barros, M. M. S. B.; Campos, J. S. (2001), “A influência da manutenção na durabilidade dos revestimentos de fachada de edifícios”, In: Workdur - II Workshop sobre durabilidade das construções, São José dos Campos (Brasil), pp. 144-154.
Romero, N., Dupuy, C., Quiñones, J. (2011), “Influência de la contaminación atmosférica en la fachada de rascacielos, caso Torre Colpatria”, Revista ALCONPAT, V. 1, No. 3, pp. 228-235.
Shirakawa, M. A. (1995), “Identificação de fungos em revestimentos de argamassa com bolor evidente”, In: I Simpósio Brasileiro de Tecnologia das Argamassas, Goiânia (Brasil), pp.402-10.
_______________________________
License in effect from September 2020
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
.png)
