Impacto de estrategias de diseño y seguimiento por durabilidad en el comportamiento electroquímico y microambiental de la subestructura de un palafito de concreto reforzado expuesto a microclimas tropicales marinos por siete años.

Jorge Alberto Briceño-Mena; Andrés Antonio Torres-Acosta; María Teresa Castillo-Burguete; Pedro Castro-Borges

doi:10.21041/ra.v16i2.1040

Authors

Jorge Alberto Briceño-Mena 1 Departamento de Física Aplicada, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Mérida, Mérida, México. 2 Investigador por México, Consejo Nacional de Humanidades, Ciencias y Tecnologías, Ciudad de México, México.
Andrés Antonio Torres-Acosta Departamento de Tecnologías Sostenibles y Civil, Instituto Tecnológico de Estudios Superiores, Tecnológico de Monterrey, Campus Querétaro, Querétaro, México
María Teresa Castillo-Burguete Departamento de Ecología Humana, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Mérida, Mérida, México
Pedro Castro-Borges Departamento de Física Aplicada, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Unidad Mérida, Mérida, México

DOI:

https://doi.org/10.21041/ra.v16i2.1040

Keywords:

corrosion, durability, infrastructure, design, stilt house

Abstract

The objective of this work was to analyze the impact of design and durability monitoring strategies on the internal electrochemical and microenvironmental results, at the level of the reinforcement of some columns, obtained during seven years in the fifth generation of the substructure of a prefabricated stilt house, according to criteria that gave rise, at the time, to the NMX-530-ONNCCE-2018 and NMX-569-ONNCCE-2020 standards on durability. The results showed that, although the elements are completely passive, the design, construction, and monitoring strategies allowed to clearly see the influence of each microenvironment on electrochemical trends. This will allow the design of ad hoc and economical strategies for preventive maintenance, as well as facilitate the recalibration of service life projections according to each microenvironment

Downloads

Download data is not yet available.

References

Andrade, C., & Alonso, C. (1996). Corrosion rate monitoring in the laboratory and on-site. In Construction and Building Materials. 10(5). DOI: https://doi.org/10.1016/0950-0618(95)00044-5

Andrade, C., & Alonso, C. (2004). Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. Materials and Structures. 37(9):623–643. https://doi.org/10.1007/BF02483292 DOI: https://doi.org/10.1007/BF02483292

Andrade, C., Rebolledo, N., & Pedrosa, F. (2012). From the instantaneous corrosion rate to a representative value. Concrete Repair, Rehabilitation and Retrofitting III - Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR 2012, 59–63. https://doi.org/10.1201/B12750-10 DOI: https://doi.org/10.1201/b12750-10

Aumento de las Temperaturas. (2019). Universidad Nacional Autónoma de México.

Bouteiller, V., Cherrier, J. F., L’Hostis, V., Rebolledo, N., Andrade, C., & Marie-Victoire, E. (2012). Influence of humidity and temperature on the corrosion of reinforced concrete prisms. European Journal of Environmental and Civil Engineering, 16(3–4):471–480. https://doi.org/10.1080/19648189.2012.668004 DOI: https://doi.org/10.1080/19648189.2012.668004

Briceño-Mena, J. A., Balancán-Zapata, M. G., Castillo-Burguete, M. T., Torres-Acosta, A.A., & Castro-Borges, P. (2024). Construcción y caracterización de un palafito de concreto en el Golfo de México: Un enfoque en durabilidad y sostenibilidad. Memorias del XI Congreso Nacional de Alconpat México “20 años de Congresos Nacionales de Alconpat México, V1, Control de Calidad, paper CC-394-MX, pp. 321–333, 10-12 de septiembre de 2024, Oaxaca de Juárez, Oaxaca, México.

Briceño-Mena, J. A., Balancán-Zapata, M. G., Pérez-García, E. J., Nieves-Mendoza, D., & Castro-Borges, P. (2025). Electrochemical Differences in the Passivity State of Reinforced Concrete for Two Mix Design Methods. Buildings, 15(8):1293. https://doi.org/10.3390/buildings15081293 DOI: https://doi.org/10.3390/buildings15081293

Briceño-Mena, J.A., Puc-Vázquez, J. A., Castro-Borges, P., Castillo-Burguete, M.T. (2024). Concrete durability in vulnerable coastal communities: The role of the Participatory Action Research (PAR) for social appropriation. Proceedings of the 10th International Conference on CONcrete under SEvere Conditions – Environment and Loading, September 25-27, Chennai, India pp. 69-72.

Broomfield, J. P. (2023). Corrosion of Steel in Concrete: Understanding, Investigation and Repair (3rd ed.). CRC Press. https://doi.org/10.1201/9781003223016 DOI: https://doi.org/10.1201/9781003223016

Cabrera-Madrid, J. A., Balancán-Zapata, M., Torres-Acosta, A. A., Castro-Borges, P. (2014). Effect of tropical marine microclimates on depassivation and corrosion-induced cracking of reinforced concrete. Int. J. Electrochem. Sci., 9, 8211 – 8225. DOI: https://doi.org/10.1016/S1452-3981(23)11041-8

Cao, Y., Gehlen, C., Angst, U., Wang, L., Wang, Z., & Yao, Y. (2019). Critical chloride content in reinforced concrete — An updated review considering Chinese experience. In Cement and Concrete Research 117:58–68. Elsevier Ltd. https://doi.org/10.1016/j.cemconres.2018.11.020 DOI: https://doi.org/10.1016/j.cemconres.2018.11.020

Castro-Borges, P., Balancán-Zapata, M., & López-González, A. (2013). Analysis of tools to evaluate chloride threshold for corrosion onset of reinforced concrete in tropical marine environment of Yucatán, México. Journal of Chemistry. https://doi.org/10.1155/2013/208619 DOI: https://doi.org/10.1155/2013/208619

Castro-Borges, P., Balancán-Zapata, M., & Zozaya-Ortiz, A. (2017). Electrochemical meaning of cumulative corrosion rate for reinforced concrete in a tropical natural marine environment. Advances in Materials Science and Engineering. https://doi.org/10.1155/2017/6973605 DOI: https://doi.org/10.1155/2017/6973605

Castro-Borges, P., Dickinson, F., Castillo, T., Torres Acosta A. A. & García, C. (2011). Investigación participativa para crear viviendas durables, en Memorias del XI Congreso Latinoamericano de Patología de la Construcción y XII Congreso de Control de Calidad en la Construcción, La Antigua Guatemala, Guatemala, 4 a 6 de Octubre, ISBN 978-9929-40-175-4, Trabajo 307 MX, Vol 2, Patología

Castro-Borges, P. & Veleva, L. (2015). Time of wetness and temperature as tools to evaluate corrosion risk in concrete blocks exposed to a humid tropical environment, en Journal of Construction. 4(2), August. DOI: https://doi.org/10.4067/S0718-915X2015000200009

Chauhan, A., & Sharma, U. K. (2019). Influence of temperature and relative humidity variations on non-uniform corrosion of reinforced concrete. Structures, 19:296–308. https://doi.org/10.1016/j.istruc.2019.01.016 DOI: https://doi.org/10.1016/j.istruc.2019.01.016

Feliu, V., González, J. A., & Feliu, S. (2007). Corrosion estimates from the transient response to a potential step. Corrosion Science, 49(8):3241–3255. https://doi.org/10.1016/j.corsci.2007.03.004 DOI: https://doi.org/10.1016/j.corsci.2007.03.004

Huracanes - Corescam. (n.d.). Retrieved April 7, 2025, from https://corescam.org/ecosistemas/huracanes/

Organismo Nacional de Normalización y Certificación de la Construcción y Edificación, S.C. (2021). NMX-C-495-ONNCCE-2015 Industria de La Construcción – Durabilidad de Estructuras de Concreto Reforzado – Medición de Potenciales de Corrosión Del Acero de Refuerzo Sin Revestir, Embebido En Concreto - Especificaciones y Método de Ensayo. México.

Organismo Nacional de Normalización y Certificación de la Construcción y Edificación, S.C. (2015). NMX-C-501-ONNCCE-2015. Industria de La Construcción - Durabilidad de Estructuras de Concreto Reforzado - Medición de Velocidad de Corrosión En Campo - Especificaciones y Método de Ensayo. México.

Organismo Nacional de Normalización y Certificación de la Construcción y Edificación, S.C. (2019). NMX-C-514-ONNCCE-2019 Industria de la construcción-Resistividad eléctrica del concreto hidráulico-Especificaciones y método de ensayo. México

Trocónis de Rincón, O., Romero de Carruyo, A., Andrade, C., Helene, P., & Díaz, I. (1997). Manual de inspección, evaluación y diagnóstico de corrosión en estructuras de hormigón armado. Programa Iberoamericano de Ciencia y Tecnología para el Desarrollo. Durabilidad de la Armadura. CYTED.

Ramón, J. E., Castillo, & Martínez, I. (2021). On-site corrosion monitoring experience in concrete structures: Potential improvements on the current-controlled polarization resistance method. Materiales de Construccion, 71(344). https://doi.org/10.3989/mc.2021.11221 DOI: https://doi.org/10.3989/mc.2021.11221

RILEM TC-154 ECM. (2024). RILEM TC-154 ECM: ON-SITE CORROSION CONDITION ASSESSMENT, MONITORING AND PREDICTION - Half-Cell Potential Measurements - Recommendation on practical execution.

Torres-Acosta, A. A., & Martínez-Madrid, M. (2003). Residual Life of Corroding Reinforced Concrete Structures in Marine Environment. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 15(4):344–353. https://doi.org/10.1061/ASCE0899-1561200315:4344 DOI: https://doi.org/10.1061/(ASCE)0899-1561(2003)15:4(344)

Villagrán Zaccardi, Y. A., Bértora, A., & Di Maio, A. A. (2013). Temperature and humidity influences on the on-site active marine corrosion of reinforced concrete elements. Materials and Structures/Materiaux et Constructions, 46(9):1527–1535. https://doi.org/10.1617/s11527-012-9994-z DOI: https://doi.org/10.1617/s11527-012-9994-z

Xia, D. H., Deng, C. M., Macdonald, D., Jamali, S., Mills, D., Luo, J. L., Strebl, M. G., Amiri, M., Jin, W., Song, S., & Hu, W. (2022). Electrochemical measurements used for assessment of corrosion and protection of metallic materials in the field: A critical review. In Journal of Materials Science and Technology. 112:151–183. Chinese Society of Metals. https://doi.org/10.1016/j.jmst.2021.11.004 DOI: https://doi.org/10.1016/j.jmst.2021.11.004