Design and evaluation of service life through concrete electrical resistivity

Keywords: concrete electrical resistivity, durability performance, chloride diffusion coefficient

Abstract

This paper describes the use of concrete electrical resistivity as durability performance parameter and the complementary information that resistivity can provide like: setting period, mechanical strength and degree of curing. Also, it is explained how to design the concrete mix to obtain a target resistivity. Current codes have prescriptive requirements for the durability of concrete and reinforcement corrosion. However, modern trends specify the performance rather than the concrete characteristics. This performance approach demands to define a durability controlling parameter, such as the chloride diffusion coefficient, with its corresponding test and the model to predict the time to steel corrosion.

Downloads

Download data is not yet available.

References

Andrade, C. (1993), Calculation of chloride diffusion coefficients in concrete from ionic migration measurements. Cement and Concrete Research, Volume 23, Issue 3, pp. 724-742. https://doi.org/10.1016/0008-8846(93)90023-3

Andrade, C. (2004), “Calculation of initiation and propagation periods of service-life of reinforcements by using the electrical resistivityâ€. International RILEM Symposium on Concrete Science and Engineering: A Tribute to Arnon Bentur, 22-24, RILEM Publications SARL.

Andrade, C., Bolzoni F., Fullea, J. (2011), Analysis of the relation between water and resistivity isotherms in concrete, Materials and Corrosion, 62, no.2 130-138, https://doi.org/10.1002/maco.201005777

Andrade, C., Castellote, M., D’Andrea, R. (2011) Measurement of ageing effect of chloride diffusion coefficients in cementitious matrices, Journal of Nuclear Materials, Volume 412, Issue 1, pp 209-216. https://doi.org/10.1016/j.jnucmat.2010.12.236

Andrade C., D`Andréa, R. (2010), Concrete mix design based on the electrical resistivity- 2nd International Conference on Sustainable Construction Materials and Technologies. Ancona- Italy June. Ed. Coventry University UK.

Andrade, C., D’Andrea, R., Rebolledo, N. (2014), “Chloride ion penetration in concrete: The reaction factor in the electrical resistivity modelâ€, Cement and Concrete Composites, Volume 47, pp 41-46, https://doi.org/10.1016/j.cemconcomp.2013.09.022

Andrade, C., Fullea, J., Alonso, C. (2000), The use of the graph corrosion rate-resistivity in the measurement of the corrosion current- Proceedings of the International Workshop on “Measurement and interpretation of the on-site corrosion rate. MESINA- RILEM Proc. No. 18. Ed. C. Andrade, C. Alonso, J. Fullea, J. Polimon and J. Rodriguez. Rilem Publications S.A.R.L. 157-166.

Andrade C., Fullea J., Alonso C. (2000b), The use of the graph corrosion rate-resistivity in the measurement of the corrosion current- Proceedings of the International Workshop on “Measurement and interpretation of the on-site corrosion rate. MESINA- RILEM, Proc. No. 18. Ed. C. Andrade, C. Alonso, J. Fullea, J. Polimon and J. Rodriguez. Rilem Publications S.A.R.L. 157-166.

Andrade, C. and Gónzalez, J. A. (1978), Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements, Materials and Corrosion, Volume 29, Issue 8, 515. https://doi.org/10.1002/maco.19780290804

Andrade, C., Zuloaga, P., Martinez, I., Castillo, A., Briz, S. (2011), Effect of temperature on the corrosion parameters and apparent activation energy measured by embedded sensors in a pilot container in “el Cabril†repository. Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, Vol 46, No 2, pp 182-189. https://doi.org/10.1179/1743278211Y.0000000007

Andrade. C., Alonso, C., Goñi, S. (1993), Possibilities for electrical resistivity to universally characterize mass transport processes in Concrete. Concrete 2000: Economic and Durable Construction Through Excellence, V. 2, R.K. Dhir and M.R. Jones, eds., E&FN Spon, Cambridge, pp. 1639-1652.

Archie, G. E. (1942), “The electrical resistivity log as an aid in determining some reservoir characteristics†Transactions of the AIME. 146, 54. https://doi.org/10.2118/942054-G

Calleja, J. (1953), Determination of settings and hardening time of high-alumina cements by electrical resistance techniques. Journal of ACI, vol 25, pp. 249

Dhir, R. K., Jones, M. R. (1999), “Development of chloride-resisting concrete using fly ashâ€, Fuel, Volume 78, Issue 2, pp. 137-142

Garboczi, E. J. (1990), “Permeability, Diffusivity and Microestructural Parameters: A Critical Reviewâ€, Cement and Concrete Research, Volume 20, Issue 4, pp. 591-601. https://doi.org/10.1016/0008-8846(90)90101-3

Gjorv, O. E., Vennesland, O., El-Busaidy, A. H. S. (1986), Diffusion of Dissoved Oxygen Through Concrete, Materials Performance, Vol. 25, No. 12, December, pp. 39-44

González, J. A., Algaba, S., Andrade, C. (1980), Corrosion of reinforcing bars in carbonated concrete, British Corrosion Journal, Volume 15, Issue 3. https://doi.org/10.1179/bcj.1980.15.3.135

Gouda, V. K., Monfore, G. E. (1965), A rapid method for studying corrosion inhibition on steel in concrete. Journal PCA, vol 7 n. 3, pp. 24.

Hammond, E., Robson, T. D. (1955), Comparison of electrical properties of various cements and concretes. The Engineer, vol 199, pp. 78-80 and pp. 114.115.

McCarter, W. J., Garvin, S., (1989) “Dependence of Electrical Impedance of Cement-Based Materials on their Moisture Conditionâ€, Journal of Physics D Applied Physics, Vol. 22 (11), pp. 1773 – 1776.

Monfore, G. E. (1968), The electrlcal resistlvity of concrete. Journal P.C.A. Applled Research Sectlon. pp. 35.

Lambert, P., Page, C. L., Vassie, P. R. W. (1991), “Investigations of reinforcement corrosion, 2: Electrochemical monitoring of steel in chloride-contaminated concreteâ€, Materials and Structures, 24 (5), pp. 351-358. https://doi.org/10.1007/BF02472068

Page, C. L., Treadaway, K. W. J. (1982), Aspects of the electrochemistry of steel in concrete. Nature 297, pp. 109-115. https://doi.org/10.1038/297109a0

Tang, L. (1996), Chloride Transport in Concrete – Measurement and Prediction, Chalmers University of Technology, Dept. of Building Materials. ISSN: 1104-893X

Published
2018-08-31
How to Cite
Andrade, C. (2018). Design and evaluation of service life through concrete electrical resistivity. Revista ALCONPAT, 8(3), 264 - 279. https://doi.org/10.21041/ra.v8i3.349
Section
Review