Infrared thermography as a non-destructive test for the inspection of reinforced concrete bridges: A review of the state of the art

  • Joaquin Humberto Aquino Rocha Universidade de Pernambuco
  • Yêda Vieira Póvoas Tavares Universidade de Pernambuco
Keywords: infrared thermography, bridge inspection, concrete pathologies

Abstract

This article aims to present the methodologies, advantages and limitations of the infrared thermography test for the inspection of reinforced concrete bridges. A systematic review of area-related articles and academic material was carried out. This review focus mainly on passive thermography in both laboratory and field studies. A critical approach to the available information regarding its scope was used. This technique is presents a real alternative for detecting defects in reinforced concrete bridges because the more superficial the anomalies in these structures are, the more effective it is Also, depending on the work to be carried out, a variety of factors should be taken into consideration for better results. Moreover, infrared thermography is more effective when combined with other non-destructive tests

Downloads

Download data is not yet available.

References

Abdel-Qader, I., Yohali, S., Abudayyeh, O., Yehia, S. (2008), “Segmentation of thermal images for non-destructive evaluation of bridge decksâ€. NDT&E International, V.41, No. 5, pp. 395-405. https://doi.org/10.1016/j.ndteint.2007.12.003

ABNT-Associação Brasileira de Normas Técnicas. (2016), “NBR 9452: Inspeção de pontes, viadutos e passarelas de concreto – Procedimento†(Rio de Janeiro, Brasil: ABNT), p. 48.

ACI-American Concrete Institute. (2013), “228:2R-13 Report on nondestructive test methods for evaluation of concrete in structures†(Detroit, United States: ACI Publications), p. 82.

Aggelis, D., Kordatos, E., Soulioti, D., and Matikas, T. (2010), “Combined use of thermography and ultrasound for the characterization of subsurface cracks in concreteâ€, Constr. Build.Mater., V.24, No. 10, pp. 1888–1897. https://doi.org/10.1016/j.conbuildmat.2010.04.014

Alani, A., Aboutalebi, M., Kilic, G. (2014), “Integrated health assessment strategy using NDT for reinforced concrete bridgesâ€, NDT & E International, V.61, pp. 80–94. https://doi.org/10.1016/j.ndteint.2013.10.001

Alfredo-Cruz, R., Quintero-Ortiz, L., Galán-Pinilla, C., Espinosa-García, E. (2015), “Evaluación de técnicas no destructivas en elementos de concreto para puentesâ€, Revista Fac. Ing., V.24, No. 40, pp. 83-96. http://dx.doi.org/10.19053/01211129.3850

Arndt, R. (2010), “Square pulse thermography in frequency domain as adaptation of pulsed phase thermography for qualitative and quantitative applications in cultural heritage and civil engineeringâ€, Infrared Physics & Technology, V.53, No. 4, pp. 246–253. https://doi.org/10.1016/j.infrared.2010.03.002

ASTM. (2013b), “D4788-03: Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermographyâ€, (West Conshohocken, United States: ASTM International), p. 3. http://dx.doi.org/10.1520/D4788

ASTM. (2015a), “C1060-11a: Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildingsâ€, (West Conshohocken, United States: ASTM International), p. 7. http://dx.doi.org/10.1520/C1060-11AR15

ASTM. (2015b), “C1153-10: Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imagingâ€, (West Conshohocken, United States: ASTM International), p. 6. http://dx.doi.org/10.1520/C1153-10R15

ASTM-American Society of Testing Materials. (2013a), “C1046-95: Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Componentsâ€, (West Conshohocken, United States: ASTM International), p. 7. http://dx.doi.org/10.1520/C1046

Bagavathiappan, S., Lahiri, B., Saravanan, T., Philip, J. (2013), “Infrared thermography for condition monitoring – A reviewâ€, Infrared Physics & Technology, V.60, No. 1, pp. 35-55. https://doi.org/10.1016/j.infrared.2013.03.006

Barreira, E., Almeida, R., Delgado, J. (2016), “Infrared thermography for assessing moisture related phenomena in building componentsâ€, V.101, pp. 251-269. https://doi.org/10.1016/j.conbuildmat.2016.02.026

Buyukozturk, O. (1998), “Imaging of concrete structuresâ€, NDT&E International, V.31, No. 4, pp. 233–243. https://doi.org/10.1016/S0963-8695(98)00012-7

Chang, P., Flatau, A., Liu, S. (2003), “Review paper: health monitoring of civil infrastructureâ€, Structural Health Monitoring, V.2, No. 3, pp. 257–267.

Cheng, Ch.; Cheng, T.; Chiang, Ch. (2008), “Defect detection of concrete structures using both infrared thermography and elastic wavesâ€. Automation in Construction, V.18, No. 1, pp. 87-92.

Clark, M., McCann, D., Forde, M. (2003), “Application of infrared thermography to the non-destructive testing of concrete and masonry bridgesâ€. NDT&E International, V.36, No. 4, pp. 265-275. https://doi.org/10.1016/S0963-8695(02)00060-9

Dabous, S., Yaghi, S., Alkass, S., Moselhi, O. (2017), “Concrete bridge deck condition assessment using IR Thermography and Ground Penetrating Radar technologiesâ€, Automation in Construction. http://dx.doi.org/10.1016/j.autcon.2017.04.006

Davis, A. (2003), “The nondestructive impulse response test in North America:1985–2001â€, NDT&E International, V.36, No. 4, pp. 185–193.https://doi.org/10.1016/S0963-8695(02)00065-8

Ellenberg, A., Kontsos, A., Moon, F., Bartoli, I. (2016). “Bridge Deck delamination identification from unmanned aerial vehicle infrared imageryâ€, Automation in Construction, V.72, No. 2, pp. 155-165. https://doi.org/10.1016/j.autcon.2016.08.024

Estes, A., Frangopol, D. (2003), “Updating bridge reliability based on bridge management systems visual inspection resultsâ€, J. Bridge Eng., V.8, No. 6, pp. 374–382.

Farrag, S., Yehia, S., Qaddoumi, N. (2016), “Investigation of Mix-Variation Effect on Defect-Detection Ability Using Infrared Thermography as a Nondestructive Evaluation Techniqueâ€, J. Bridge Eng., V.21, No. 3, pp. 1-15. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000779

FLIR-Forward Looking Infrared. (2013), “User’s manual FLIR Exx Series†(Wilsonville, United States: FLIR), p. 100.

Fox, M., Goodhew, S., Wilde, P. (2016), “Building defect detection: External versus internal thermographyâ€, Building and Environment, V.105, pp. 317-331.

GPO-Government Publishing Office. (2015), “Electronic Code of Federal Regulations: Subpart C, Title 23, 650.311†(Washington D.C., United States: GPO).

Gucunski, N., Imani, A., Romero, F., Nazarian, S., Yuan, D., Wiggenhauser, h., Shokouhi, P., Taffe, A., Kutrubes, D. (2013), “Nondestructive Testing to Identify Concrete Bridge Deck Deterioration†(Washington D.C., United States: SHRP 2 Research Reports, Transportation Research Board of the National Academies), p. 85. https://doi.org/10.17226/22771

Gucunski, N., Kee, S., La, H., Basily, B., Maher, A. (2015), “Delamination and concrete quality assessment of concrete bridge decks using a fully autonomous RABIT platformâ€, Structural Monitoring and Maintenance, V.2, No. 1, pp.19-34. http://dx.doi.org/10.12989/smm.2015.2.1.019

Herrmann A. (2013), “ASCE 2013 Report card for America’s Infrastructure†(Washington D.C., United States: ASCE), p. 74. http://dx.doi.org/10.1061/9780784478837

Hiasa, S. (2016), “Investigation of infrared thermography for subsurface damage detection of concrete structuresâ€. Tese de Doutorado, University of Central Florida, p. 224.

Hiasa, S., Birgul, R., Catbas, F. (2016), “Infrared thermography for civil structural assessment: demonstrations with laboratory and field studiesâ€, J Civil Struct Health Monit, V.6, No. 3, pp. 619-636. http://dx.doi.org/10.1007/s13349-016-0180-9

Hiasa, S., Birgul, R., Catbas, N. (2017a), “Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modelingâ€, Construction and Building Materials, V.150, pp. 295-309. http://dx.doi.org/10.1016/j.conbuildmat.2017.05.175

Hiasa, S., Birgul, R., Catbas, N. (2017b), “A data processing methodology for infrared thermography images of concrete bridgesâ€, Computers & Structures, V.190, pp. 205-218. https://doi.org/10.1016/j.compstruc.2017.05.011

Hiasa, S., Catbas, F., Matsumoto, M., Mitani, K. (2016), “Monitoring concrete bridge decks using infrared thermography with high speed vehicles. Structural Monitoring and Maintenanceâ€, V.3, No. 3, pp. 277-296. https://doi.org/10.12989/smm.2016.3.3.277

Holt, F., Manning, D. (1980), “Detecting Delamination in Concrete Bridge Decksâ€, Concrete International, V.2, No. 11, pp. 34-41.

Islam, A., Li, F., Hamid, H., Jaroo, A. (2014), “Bridge Condition Assessment and Load Rating using Dynamic Response†(Youngstown, United States: ODOT), p. 128.0

Jadin, M., Taib, S. (2012), “Recent progress in diagnosing the reliability of electrical equipment by using infrared thermographyâ€, Infrared Physics & Technology, V.55, No. 4, pp. 236–245. https://doi.org/10.1016/j.infrared.2012.03.002

Jain, K., Bhattacharjee, B. (2011), “Application of fuzzy concepts to the visual assessment of deteriorating reinforced concrete structuresâ€, Journal of Construction Engineering Management, V.138, No.3, pp. 399-408. http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0000430

Kee, S., Oh, T., Popovics, J., Arndt, R., Zhu, J. (2012), “Nondestructive bridge deck testing with air-coupled impact-echo and infrared thermographyâ€. Journal of Bridge Engineering, V.17, No. 6, pp. 928-939. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000350

Lahiri, B., Bagavathiappan, S., Jayakumar, T., Philip, J. (2012) “Medical applications of infrared thermography: a reviewâ€, Infrared Physics & Technology, V.55, No. 4, pp. 221–235. https://doi.org/10.1016/j.infrared.2012.03.007

Maierhofer, C., Arndt, R., Rollig, M. (2007), “Influence of concrete properties on the detection of voids with impulse-thermographyâ€, Infrared Physics & Technology, V.49, No. 3, pp. 213–217.

Maierhofer, C., Arndt, R., Rollig, M., Rieck, C., Walther, A., Scheel, H., Hillemeier, B. (2006), “Application of impulse thermography for non-destructive assessment of concrete structuresâ€, Cement & Concrete Composites, V.28, No. 4, pp. 393-401. https://doi.org/10.1016/j.cemconcomp.2006.02.011

Maldague, X. (2001), “Theory and Practice of Infrared Technology for Nondestructive Testing†(New York, United States: John Wiley and Sons), p. 704. ISBN: 978-0-471-18190-3

Maser, K., Roddis, W. (1990), “Principles of thermography and radar for bridge deck assessmentâ€, J. Transport. Eng., V.116, No. 5, pp. 583–601. https://doi.org/10.1061/(ASCE)0733-947X(1990)116:5(583)

McCan, D., Forde, M. (2001), “Review of NDT methods in the assessment of concrete and masonry structuresâ€, NDT & E International, V.34, No. 2, pp. 71–84. https://doi.org/10.1016/S0963-8695(00)00032-3

Mendes, P., Moreira, M., Pimienta, P. (2012), “Pontes de concreto armado: efeitos da corrosão e da variação do módulo de elasticidade do concretoâ€, IBRACON de Estruturas e Materiais, V.5, No. 3, pp. 389-401. http://dx.doi.org/10.1590/S1983-41952012000300008

Meola, C., Carlomagno, G., Squillace, A., Giorleo, G. (2002), “Non-destructive control of industrial materials by means of lock-in thermographyâ€, Measurement Science & Technology, V.13, No. 10, pp. 1583–1590. https://doi.org/10.1088/0957-0233/13/10/311

Meola, C. (2007), “Infrared thermography for masonry structureâ€, Infrared Physics & Technology, V.49, No. 3, pp. 228–233. https://doi.org/10.1016/j.infrared.2006.06.010

Meola, C. (2012), “Origin and theory of infrared thermographyâ€, in: C. Meola (Ed.), Infrared Thermography Recent Advances and Future Trends, Bentham eBooks, pp. 3–28.

Montanini, R. (2010), “Quantitative determination of subsurface defects in a reference specimen made of plexiglas by means of lock-in and pulsed phase infrared thermographyâ€, Infrared Physics & Technology, V.53, No. 5, pp. 363–371. https://doi.org/10.1016/j.infrared.2010.07.002

O’Grady, M., Lechowska, A., Harte, A. (2016), “Infrared thermography technique as in-situ method of assessing heat loss through thermal bridgingâ€, Energy and Buildings, V.135, pp. 20-32. https://doi.org/10.1016/j.enbuild.2016.11.039

Oh, T., Kee, S., Arndt, R., Popovics, J., Zhu, J. (2013), “Comparison of NDT Methods for Assessment of a Concrete Bridge Deckâ€, Journal of Engineering Mechanics, V.139, No. 3, pp. 305-314. http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000441

Pines, D., Aktan, A. (2002), “Status of structural health monitoring of long-span bridges in the United Statesâ€, Prog. Struct. Mater. Eng., V.4, No. 4, pp. 372–380.

Pintan, N., Berenguer, R., Silva A., Lins, C., Monteiro, E. (2015), “Pathological Manifestations and the Study of Corrosion Present on Bridges of the City of Recifeâ€, Electronic Journal of Geotechnical Engineering, V.20, No. 24, pp. 11893-11907.

Poblete, A., Pascual, M. (2007), “Thermographic measurement of the effect of humidity in mortar porosityâ€, Infrared Physics & Technology, V.49, No. 3, pp. 224–227. https://doi.org/10.1016/j.infrared.2006.06.009

Rehman, S., Ibrahim, Z., Memon, S., Jameel, M. (2016), “Nondestructive test methods for concrete bridges: A reviewâ€, Construction and Building Materials, V.107, No. 15, pp. 58-86. http://dx.doi.org/10.1016/j.conbuildmat.2015.12.011

Sakagami, T., Kubo, S. (2002), “Development of a new non-destructive testing technique for quantitative evaluations of delamination defects in concrete structures based on phase delay measurement using lock-in thermographyâ€, Infrared Physics & Technology, V.43, No. 3-5, pp. 311-316. https://doi.org/10.1016/S1350-4495(02)00157-3

Scott, M., Rezaizadeh, A., Delahaza, A., Santos, C., Moore, M., Graybeal, B. (2003), “A comparison of nondestructive evaluation methods for bridge deck assessmentâ€, NDT&E International, V.36, No. 4, pp. 245–255. https://doi.org/10.1016/S0963-8695(02)00061-0

Sham, J., Lo, T., Memon, S. (2012), “Verification and application of continuous surface temperature monitoring technique for investigation of nocturnal sensible heat release characteristics by building fabricsâ€, Energy Build., V.53, pp. 108–116. https://doi.org/10.1016/j.enbuild.2012.06.018

Uemoto, T. “Maintenance of concrete structure and application of nondestructive inspection in Japanâ€, in: T. Uemoto (Ed.), Proc. Non Destructive Testing in Civil Eng., ELSEVIER, 2000, Kidlington: OX (UK), (2000) pp. 1–11.

Vaghefi, K., Ahlborn, T., Harris, D., Brooks, C. (2015), “Combined Imaging Technologies for Concrete Bridge Deck Condition Assessmentâ€. Journal of Performance of Constructed Facilities, V.29, No. 4, pp. 1-8. http://dx.doi.org/10.1061/(ASCE)CF.1943-5509.0000465

Vaghefi, K., Oats, R., Harris, D., Ahlborn, T., Brooks, C., Endsley, K., Roussi, C., Shuchman, R., Burns, J., Dobson, R. (2012), “Evaluation of Commercially Available Remote Sensors for Highway Bridge Condition Assessmentâ€, Journal of Bridge Engineering, V. 17, No. 6, pp. 886-895. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000303

Vaghefi, K., Melo e Silva, H., Harris, D., Ahlborn, R. (2011), “Application of thermal IR imagery for concrete bridge inspectionâ€. In: PCI National Bridge Conference, PCI/NBC, Salt Lake City: UT (USA), pp. 1-12.

Vemuri, S., Atadero, A. (2017), “Case Study on Rapid Scanning Techniques for Concrete Bridge Decks with Asphalt Overlay: Ground-Penetrating Radar and Infrared Thermographyâ€, Pract. Period. Struct. Des. Constr., V.22, No. 2, pp. 1-8. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000313

Venkataraman, B., Raj, B., Mukhopadhyay, C., Jayakumar, T. (2001), “Correlation of infrared thermographic patterns and acoustic emission signals with tensile deformation and fracture processesâ€, in: D. Thompson, D. Chiment (Eds.), Review of Progress in Quantitative Nondestructive Evaluation, AIP Conferece Proceedings, Melville: NY (USA), pp. 1443–1450. http://dx.doi.org/10.1063/1.1373923

Vilbig, R. (2013), “Air-Coupled and ground-coupled ground penetrating radar techniquesâ€, Tese de Mestrado, Northeastern University - Boston, p. 60.

Vitório, J., Barros, R. (2013), “Análise dos danos estruturais e das condições de estabilidade de 100 pontes rodoviárias no Brasilâ€, In: P. Cruz, R. Calçada, T. Mendonça (Eds), Segurança, Conservação e Reabilitação de Pontes, ASCP, Porto: Portugal, pp. 62-70.

Washer, G. (2012), “Advances in the use of thermographic imaging for the condition assessment of bridges. Bridge Structuresâ€, V.8, No. 2, pp. 81-90. http://dx.doi.org/10.3233/BRS-2012-0041

Washer, G., Fenwick, R., Bolleni, N. (2009), “Development of Hand-held Thermographic Inspection Technologies†(Jefferson City, United States: MODOT), p. 120.

Washer, G., Fenwick, R., Bolleni, N. (2010), “Effects of Solar Loading on Infrared Imaging of Subsurface Features in Concreteâ€, Journal of Bridge Engineering, V.15, No. 4, pp. 384-390. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000117

Washer, G., Trial, M., Jungnitsch, A., Nelson, S. (2015), “Field Testing of Hand–Held Infrared Thermography, Phase II†(Columbia, United States: MODOT), p. 104.

Watase, A., Birgul, R., Hiasa, S., Matsumoto, M., Mitani, K., Catbas, F. (2015), “Practical identification of favorable time windows for infrared thermography for concrete bridge evaluationâ€, Construction and Building Materials, V.101, No. 1, pp. 1016-1030. https://doi.org/10.1016/j.conbuildmat.2015.10.156

Yehia, S., Adudayyeh, O., Nabulsi, S., Abdelqader, I. (2007), “Detection of common defects in concrete bridge decks using nondestructive evaluation techniquesâ€, Journal of Bridge Engineering, V.12, No. 2, pp. 215-225. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:2(215)

Yuanlin, L., Qingju, T., Chiwu, B., Chen, M., Pingshan, W., Jiansuo, Z. (2015), “Pulsed infrared thermography processing and defects edge detection using FCA and ACAâ€, Infrared Physics & Technology, V.72, pp. 90-94. https://doi.org/10.1016/j.infrared.2015.07.010

Zhang, Z., Tsai, N., Machin, G. (2009), “Radiometric Temperature Measurements†(Oxford, United Kingdom: Academic Press), p. 480. ISBN: 978-0-123-75091-4

Zhao, H., Zhou, Z., Fan, J., Li, G., Sun, G. (2017), “Application of lock-in thermography for the inspection of disbonds in titanium alloy honeycomb sandwich structureâ€, Infrared Physics & Technology, V.81, pp. 69-78. https://doi.org/10.1016/j.infrared.2016.12.020

Published
2017-09-29
How to Cite
Aquino Rocha, J. H., & Vieira Póvoas TavaresY. (2017). Infrared thermography as a non-destructive test for the inspection of reinforced concrete bridges: A review of the state of the art. Revista ALCONPAT, 7(3), 200 - 214. https://doi.org/10.21041/ra.v7i3.223
Section
Review